Using a level, place the hangtrack where you want it on the wall and mark the holes with a pencil
For a drywall anchor, using a 3/8" drill bit, drill into the wall where your marks are. For mounting to a stud, use a 1/8" drill bit.
Using a screwdriver, screw the anchor screws through the hangtrack and into the anchors. For stud screws, screw the wood screw tightly into the stud.
Slide standards onto the hangtrack. Slide the standards away from each other until they're set wide enough for the shelf to fit into the holes.
Tilt the shelf hooks on top into the standards and rotate into place. For a single column, use the outside holes. For more than one column, leave a column of holes open for the next shelf.
Lower ther front edge of the shelf. It will stop itself when it's level. Now you're ready to hang more shelves!
Making sure to place the hooks of each shelf into holes on a level, hang the rest of your new shelves!
Over time, you can increase your storage as your number of prized possessions grows
Not everyone is ready for a full wall of modular shelving. For the book collector just getting started or for the inevitable flat surface with a few more books than planned, the Kernel bookend will mostly just sit there. But hey, now your books will too.